HDG100-M Series Small FlowSingle Seat Regulating Valve
Technical Data and Features
Valve Body:
Type: Unbalanced
Nominal Diameter: 20,25mm(3/4" ,1")
Plug Type: Plunger
Flow Characteristics: Equal percentage, linear, Quick opening
Nominal Pressure: PN16 ~ 25MPa
ANSI Class 150LB ~ 1500LB;
Connection Type: Flange(RF、RTJ、FM)
Threaded
Welding(SW、BW)
Flange Standard: ASME B16.5
DIN EN 1092-1
GB/T 9113
HG/T 20615
HG/T 20592
Face to Face: ANSI/ ISA 75.03、ASME B16.10、DIN3202、GB/T 12221 etc.
Body and Bonnet Material: WCB、LCB、WC6、CF8M、CF3M、C12、ALLOY20、MONEL、Hastelloy C ,etc.
Trim Material: 316SS、316L SS、416SS、440C、
ALLOY20、MONEL、Hastelloy C,etc.
Above+R.TFE(Reinforced PTFE)
Above + Stellite (Hard faced)
Upper Bonnet Type: standard type -29~250℃
high temperature extended type 250~565℃
low temperature type -196~250℃
steam jacket insulation type
bellows seal type
Structure: Top-guided single-seat regulating valve
Packing: PTFE V-packing
Graphite packing etc.
Others: If the valve flash, it is recommended to choose a reduced-bore type, and the plug and seat are hard faced.
Actuator part:
| Item Type |
Pneumatic diaphragm type | Pneumatic piston type | Full electronic | Electric | Full electronic (temperature- regulated actuator |
| Task | Regulating/On-Off | Regulating/On-Off | Regulating | Switch | Regulating |
| Spring range |
20-100; 40-200; 80-240KPa |
- | - | - | - |
| Air source /power |
0.14,0.25, 0.4MPa |
0.4~0.6MPa | 220V·AC50Hz | 220V·AC50Hz | 220V·AC50Hz |
| 380V·AC50Hz | 380V·AC50Hz | ||||
| Connector | Rc1/4”, Rc3/8” | Rc1/4”, Rc1/2”, Rc3/8” |
Wiring: 2-G1/2” |
Wiring: 2-G1/2” |
M27x2 |
| (Temperature sensor connector) | |||||
| Connection type of action | Air open, air close | Air open,air close,double acting | Power on, power off | Power on, power off | Cooling control, heating control |
| Allowable ambient temperature | -40 ~ +80℃ | -60 ~ +65℃ | -10 ~ +50℃ | ||
| Optional valve accessories | Electric valve positioner, air filter regulator, solenoid valve, limit switch, lock-up valve, manual device | Overload unit | Inching switch for position detecting, potentiometer | - | |
The main technic data:
| Nominal diameter | 20、25 | ||||||||||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 15 | 20 | 25 | |||
| Rated Kv | Linear | 0.02 | 0.08 | 0.12 | 0.2 | 0.32 | 0.5 | 0.8 | 1.2 | 1.8 | 2.8 | 4.4 | 6.9 | 11 | |
| Equal percentage | - | - | - | - | - | - | - | - | 1.6 | 2.5 | 4 | 6.3 | 10 | ||
| Rated stroke L(mm) | 16 | ||||||||||||||
| Diaphragm effective area (pneumatic valve) Ae(cm²) | 280 | ||||||||||||||
| Inherent flow characteristics | Linear、EQ% | ||||||||||||||
| Inherent regulating ratio | 50:1 | ||||||||||||||
| Allowable leakage | Hard seal: CLASS IV、CLASS V; Soft seal: CLASS VI | ||||||||||||||
Message
Contact Us
KINGSWAY FLOW CONTROL (CHINA ) CO., LTD.
Room 704, Full Tower, Dongsanhuan Zhong Road No.9, Chaoyang District, Beijing, China
Copyright © 2019 KINGSWAY FLOW CONTROL (CHINA ) CO., LTD. 皖ICP备16001932号 Powered by:www.300.cn Hefei SEO




